Technical Data:
- Inputs: Cycle Start, Pressure Contact, Weld Wnd, SCR Thermostat.
- Outputs: Short Circuit protected solenoid valve drive, Synchronous SCR firing.
- Supply Voltage: 230/400 V +/- 20%.
- Automatic power line frequency recognition: 50 / 60 Hz.
- Power line fluctuation compensation.
- Self Hold: The driver voltage is cut off in Standby mode.
- Suitable to drive pivoting machines
- Current cut off management All times can be set with a resolution of ½ cycle up to 10 cycles, and of 1 cycle above 10 cycles.
- Squeeze time range: 0 / 99 cycles.
- Weld time range: 0.5 / 99 cycles or continuous (Co).
- Weld current range: 10% - 99%.
- Hold time range: 0.5 / 99 cycles.
- Off Time range: 0 / 99 cycles.
- Direct setting for Weld / No Weld.
- Malfunction check.
- Solenoid valve drive: voltage: 24 V D.C. 5W max
- Short circuit protected.
- Sizes: 175 x 90 x 60