LEAD BATTERY INSULATION TEST

By means of the mechanical tips an adjustable voltage up to 1.450 Volt max under an adjustable current threshold up to a maximum of

750 mA is applied across each section of the battery. After the squeeze time of the tips across the first section the voltage starts to slop

slope as far as to the preset limit checking at the same time that the preset current threshold is not exceeded. If it occurs the voltage is

immediately switched off. The same procedure has to be repeated on all the sections of the battery. At the end of t he test the LEDS on

the front panel and the contacts available for the user indicate the sections that did not pass the insulation test.