Main Features:
- Synchronous control for SCR with phase cut off weld current regulation.
- Working cycle specially designed for Spot weld machines.
- Three different hot cycles: preheat, weld, after heat.
- Weld time setting up to 10 with a resolution of ½ period; above 10 with a resolution of 1 period.
- Weld current setting in thousands of half wave phase cut off.
- All outlets and inlets are galvanic insulated. - Setting and running capability of 32 programs remote or locally selected.
- Copy function to overwrite automatically the program 0 on all other programs.
- Line voltage compensation with activation / deactivation by system parameter.
- Network serial interface RS485. - Cycle start with concomitance (dual inlet) or via foot switch.
- First insertion delay setting with a system parameter.
- Separate proportional valve outlet galvanic insulated.
- Setting of the proportional valve full range (100%) from 5 to 10 volt with a system parameter.
- Three different Cycle Ends with correspondent time setting by system parameters.
- 16 current tables for different machine’s power factor.
- Pre stroke solenoid valve acting as pre stroke with manual opening or opening at cycle end selectable with a system parameter.
- Automatic power line frequency recogntion.
- Dedicated signals for PLC drive.
- Fully adjustable from a PC program.